What would be the best way to change shiny brass curtain rods to an antique brass or black finish? - antique brass curtain rods
Yes, as others have suggested, give them a light sanding a little scratch, so that the paint adheres.
If you have not used the spray paint lately, you're a surprise ... There are so many fresh paint spray again available! Available in various designs (flat, satin, glossy) and textures (stone, ironwork, glass) ... I like the black dog and hammered silver finish.
At the end antique brass, could hardly be a layer of black spray ... I refer to one side and very light mist! ... about his bronze sand. Or, you can not use black gold (shiny gold) as a base and add black (slightly) about it.
Choose black (me) could spray evenly over matte black (, satin or gloss), or use one of the textures ... or start with a base coat in black matte and slightly back with money. Gives the impression of tin (dark gray) can adjust the light and how light you want with more or less money. If one also money, just a little black!
In each cThe ESA is a simple, fun project for less! Do it outside if you can, and will be tried not by a windy day! Enjoy!
Tuesday, January 5, 2010
Antique Brass Curtain Rods What Would Be The Best Way To Change Shiny Brass Curtain Rods To An Antique Brass Or Black Finish?
Subscribe to:
Post Comments (Atom)
4 comments:
Yes, I think you really need to scratch the rod, as in the above 2nd Spraying as a smooth surface and lead to flaking paint. You need to grab a profile for the color. You can paint in black and again with a different color, green, gold, for example, clean up, and some but not all, before it dries to look antique.
rub lightly with sandpaper or emery cloth, hanging from the son and color with your choice of metallic paint
Spray paint. .... Quickly and simply a little fun! :)
Take a pad into contact with the boom of the painted matte black after scratching, caught about 10 minutes. They spray a soft cloth with WD40 (lubricant), thoroughly clean the search bar of your choice ... TA_DA Brass
Post a Comment